| Appliion | C A T Excavator Engine Parts |
| Name | Harness |
| Parts No | 2197461 219-7461 |
| Model | 345C 345C L 345C MH 345D 345DL 345D LVG 349D 349D L |
| Delivery time | Stock for urgent delivery |
| Quality | Brand new, OEM quality |
| MOQ | 1 PCS |
| Design | made in china |
| Means of transport | By sea/air, DHL FEDEX UPS TNT Express |
| Packing | As request or standard packing |
1.Power Distribution: Transmits electrical power from the battery and alternator to components like the ECM, fuel injectors, and sensors, ensuring a stable supply under varying operating conditions.
2.Signal Transmission: Carries sensor data (e.g., engine speed, temperature, throttle position) and control signals (for actuators, relays, solenoids) to and from the ECM, enabling precise engine management.
3.Mechanical Protection: Bundles and secures wires with abrasion-resistant sheathing and connectors, protecting them from vibration, heat, moisture, and dust in the engine compartment.
4.Electrical Isolation & Interference Reduction: Provides insulation and shielding to prevent short circuits and electrical noise, ensuring accurate sensor readings and consistent control signals.
ARTICULATED TRUCK 725 730
EJECTOR TRUCK
EXCAVATOR 345C 345C L 345C MH 345D 345DL 345D LVG 349D 349D L
- More harness parts supplied to C A T machine
| 3540048 HARNESS AS-ENGINE |
| 14M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, D8N, RM-300, TH35-C11I, TH35-C13I, W345C MH |
| |
| 3852664 HARNESS AS-ENGINE |
| 14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, W345C MH |
| |
| 3669313 HARNESS AS-SENSOR |
| 311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D,... |
| |
| 2457821 HARNESS AS-HEATER & AIR COND |
| 320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345... |
| |
| 3365967 HARNESS AS-PLATFORM |
| 345D, 345D L, 345D L VG, 349D L |
| |
| 3423138 HARNESS AS-QUICK COUPLER |
| 345D, 345D L, 345D L VG, 349D L |
| |
| 3366097 HARNESS AS-LIGHTING |
| 345D L, 345D L VG |
| |
| 3508422 HARNESS AS-LIGHTING |
| 345D L, 345D L VG, 349D L |
| Pos. | Part No | Qty | Parts name | Comments |
| 1 | 3S-2093 | [15] | STRAP-CABLE | |
| 3 | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 4 | 206-2423 | [1] | SADDLE-MOUNTING | |
| 5 | 219-7461 | [1] | HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE) | |
| | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| | 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | |
| | | | (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) |
| | 3S-2093 | [2] | STRAP-CABLE | |
| | 8T-8737 | [81] | PLUG-SEAL | |
| | 105-1797 | [1] | MOUNT | |
| | 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | |
| | 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | |
| | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| | 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | |
| | | | (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) |
| | 194-5226 | [62] | WIRE AS (16-GA) | |
| | | | -OR- |
| | 194-5227 | [62] | WIRE AS (14-GA) | |
| | 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| | | | -OR- |
| | 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | |
| | 211-6807 | [1] | COVER-CONNECTOR | |
| | 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | |
| | 288-7324 | [1] | SEAL-CONNECTOR | |
| | 125-7874 E | | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |
| | 125-7875 E | | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |
| 6 | 303-5952 | [1] | STRAP-CABLE | |
| 7 | 132-5789 | [2] | CLIP (LADDER) | |
| 8 | 156-6175 | [2] | CLIP (LADDER) | |
| 10 | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 11 | 4P-7581 | [3] | CLIP (LADDER) | |
| 12 | 5P-9085 | [1] | CLIP (LOOP) | |
| 13 | 6V-3918 M | [1] | BOLT (M8X1.25X50-MM) | |
| 14 | 6V-5839 | [5] | WASHER (11X21X2.5-MM THK) | |
| 15 | 6V-8212 M | [4] | BOLT (M10X1.5X16-MM) | |
| 16 | 6V-8836 M | [2] | BOLT (M6X1X14-MM) | |
| 19 | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20 | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| | E | | ORDER BY THE CENTIMETER |
| | M | | METRIC PART |
1.Final drive: Travel gearbox, Travel gearbox with motor, Carrier ass'y, Sun gear shaft
2.Swing gear: Center joint ass'y, Swing gearbox, Swing motor, Gear reduction ass'y
3.Undercarriage Parts: Track roller, Track link ass'y, Idler roller, Sprocket, Spring ass'y
4.Hydraulic parts: Hydraulic pump, Main Valve, Hydraulic cylinder
5. Engine parts: Engine Ass’y, Crankshaft, Turbocharger, Fuel injector, Flywheel, Starter motor, Cooling fan, Solenoid valve
6.Electrical parts: Wiring harness, Controller, Monitor
7.Other: Cylinder Seal Kits, Fuel tank, Filter, Boom, Arm, Bucket etc.
- We could supply the following spare parts
1 Hydraulic parts: hydraulic pump, main valve, hydraulic cylinder, final drive, travel motor, swing machinery, swing motor etc.
2 Engine parts: engine ass’y, piston, piston ring, cylinder block, cylinder head, crankshaft, turbocharger, fuel injection pump, starting motor and alternator etc.
3 Undercarriage part: Track roller, Carrier roller, Track Link, Track shoe, Sprocket, Idler and Idler cushion etc.
4 Cab parts: operator’s cab, wiring harness, monitor, controller, seat, door etc.
5 Cooling parts: Radiator, air conditioner, compressor, after cooler etc.
6 Other parts: Service kit, swing circle, engine hood, swing joint, fuel tank, filter, boom, arm, bucket etc.
1. Offer Top quality & competitive products
2. Support 6-month warranty
3. 100% tested before shipping
4. Delivery in time
5. A wide range of Oil Pressure Sensor, Fuel Tank Level Sensor, Temperature Sensor, Speed Sensor for excavator
6. More than 15 years production and 11 years foreign trade experience
7. Professional QC team
8. Best sales team, 24 hours service
Packing Details :
inner packing : plastic film for wrapping
external packing : wooden
Shipping :
within 3 days after received the payment , by air or by express or by sea on the basis of the
quantity and emergency circumstances.
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperated,
2. By Air: Delivery from the Guangzhou air port to customer's destination city air port.
3. By Sea: Delivery from the Huangpu port .
Product Tags:
|
|
2197461 219-7461 Harness Excavator Engine Parts Fitting For 345C 345C L 345C MH 345D Images
|
